top of page

Load data for .350 Legend + .357 | 158gr | Frontier Bullets FP

Recommended Powder(s): Hodgdon LilGun, Lovex S040

.350 Legend + .357 | 158gr | Frontier Bullets FP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 158gr | Frontier Bullets FP
Manufacturer SKU:
100118
Bullet Weight:
158gr | 10.2g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.661" | 16.8mm
Caliber:
.350 Legend load data
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
1.966" | 49.9mm
Seated Depth:
0.405" | 10.3mm
Shank Seated Depth:
0.405" | 10.3mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B10963_C500
Last updated:
2025-09-13

Load data for 26 loads in caliber .350 Legend with .357 | 158gr | Frontier Bullets FP bullet and 13 powders such as Hodgdon LilGun, Lovex S040. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
97%
45455
83%
**33
98%
[Accurate 5744]*
<<locked>>
97%
48486
88%
**44
94%
Accurate No. 11 FS
<<locked>>
97%
48689
89%
**41
97%
Hodgdon LilGun 👍
<<locked>>
95%
48994
89%
**36
100%
[IMR 4227]*
<<locked>>
96%
34693
63%
**24
91%
[Lovex D060]*
<<locked>>
96%
44005
80%
**82
92%
[Lovex D063]*
<<locked>>
95%
48704
89%
**31
94%
Lovex S040 👍
<<locked>>
93%
49443
90%
**01
100%
Lovex S053
<<locked>>
96%
31865
58%
**18
95%
SNPE Vectan BA6 1/2
<<locked>>
97%
30516
56%
**32
100%
[Shooters World Blackout]*
<<locked>>
95%
48704
89%
**31
94%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
44005
80%
**82
92%
Vihtavuori N110
<<locked>>
96%
37463
68%
**06
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
28369
52%
**50
94%
[Accurate 5744]*
<<locked>>
89%
38348
70%
**90
90%
[Accurate No. 11 FS]*
<<locked>>
81%
28877
53%
**29
91%
Hodgdon LilGun
<<locked>>
81%
30792
56%
**83
100%
[IMR 4227]*
<<locked>>
94%
32213
59%
**78
90%
[Lovex D060]*
<<locked>>
90%
37797
69%
**77
90%
[Lovex D063]*
<<locked>>
88%
38189
69%
**77
90%
Lovex S040
<<locked>>
81%
35462
65%
**08
100%
[Lovex S053]*
<<locked>>
84%
22249
40%
**95
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
20465
37%
**06
98%
[Shooters World Blackout]*
<<locked>>
88%
38189
69%
**77
90%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
37797
69%
**77
90%
Vihtavuori N110
<<locked>>
81%
24250
44%
**54
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page